-
24V voltmeter in white £20.00
This is our 80 AMP or 150 AMP ECMS ampmeter gauge. This is a standard 52mm 2 inch gauge fixed with a 'U' clamp.
The gauge is fully IP67 waterproof, has a stainless steel bezel and a glass lense. So it will never craze, rust or discolour in the sun.
The gauge comes complete with all wiring instructions, shunt and cable clamps. The gauge has its own wiring pigtail and the wiring is as follows:
Positive feed is either 12 or 24 Volts RED.
Negative feed BLUE.
Backlight ORANGE
Shunt two wires one to each side.
Full one year warranty
This is a 86mm Tachometer 0 - 2000 RPM.
The stainless steel bezel is 90 mm and the gauge is fixed with a 'U' clamp.
The gauge has a small pigtail that is wired:
Red - Feed 9 to 36 volts
Blue - Negative
Black - sensor feed
Orange - backlight 9 to 36 volts
The gauge has a 170 degree sweep for the pointer which is driven by a ultra low consumption step motor
The gauge has a engine running hours meter.